Shaft Rockers, where and what brand
Howdy folks, I have a set of Trick Flow A460 heads and I need a set of shaft rockers. I have a brand new set of Jesel's (# KCS-19187) that I bought in 2004 but they are for the Ford A460/B460 (I told them what head I had and this is what I got). I was

Jesel BBF (used)rockers and stands
used , good cond.- Jesel BBF rockers (1.70 IN&EX) / Stands . $695. can fit stock iron to A460 heads

crower shaft rockers
i'm thinken about shaft rockers for my 605 and have had realy good luck with crower stuff i've used.today i got a new summit mag in the mail and noticed crower makes shaft rockers too.i did'nt want to call the tec line to see if they make them for

C460 T&D shaft rockers & 2.400 ss int valves
like title reads ,for C460 heads . T&D & valves $1360 ph# 315 455 7316

Jesel C-460 rockers $1100.00
just like the title says! only 7 passes with no problems! 1.8 ratio, stands, rockers and fastners! $1100.00 336-462-0040 thanks, rod oh yea they are in winston salem, nc

D0OE-R heads with pedestal type rockers now...Is it easy to change to studs?
It seems like there are alot more options for roller rockers when you have studs...Is this a very big deal to change over? What kind of machining price should I expect? Looking at Scorpion, Harland Sharp, and Trick Flow Specialties and there is about a

Milodon roller arms,guide plates,studs,pushrods
I am selling my 1.73 Milodon roller rocker arm along with manley guide plates and screw in 7/16studs 1 3/4 long and stock pushrods from my stock heads as I cant use them on new set-up. all fulcrums and rollers are tight. $225 plus shipping

OK, I NEED some pushrods!!!
Here our the #'s I got for pushrod lengths on my scj heads with HS S-4073 rockers, IN/8.915 and EX/9.120 so I need something close to that, what is available and who has them. I need asap

Solutions? Rockers too high.
Our '69 429 rebuild is moving right along, at the point of determining pushrod length. Cam is a Comp 34-235-4 (Xtreme 4x4 = 262/270 @ .006, 218/226 @ .050, .513/.524 lift, 111 LSA, 107 ICL), the lifters are standard rebuilder stuff, rocker studs are

A460 Jesel shaft rockers / Comp Cam roller lifters
New Jesel shaft rockers for A460 heads , !.75 ratio , bolt together stands $1355. New Comp Cam roller lifters , $320. Ship from 13214 zip (central NY) Buy pays shipping w/insurance USPS, Fedex , UPS ..your choise

Approved method of installing pushrods and roller rockers?
I know there is a lot of info and advice out there on this topic and videos on youtube.com as well. I would like to know what method you guys use and if there is a video of it? Is this guy doing it right? http://www.youtube.com/watch?v=gJMezBqVYes

CFE BILLS
I have lived in my home since March 2006, and have taken....or is it tookin....LOL, interpreter to CFE, at least 12 times, and as of this date have not received a CFE bill. Since I can't pay my printed on line bill @ the convenient stores....7/11, OXXO,

P-51 Head's /Head Studs/pushrods (SOLD)
ALL SOLD.................

Jesel tie bar roller lifters
Anybody been using them? Solid body or TS series??? Probaly need a better lifter then what we have now. Already know the Dogbone and keyed stuff but they are real $$$$$. Thanks Frank

A429 heads, shaft rockers, intake
i have decided to post my top end. the good: the heads are ported A429 heads by evans. 2.25 1.76 valves i have the flow sheets full set of jesel shaft mount rockers 1:8 ratio cv 7/16 pushrods unported 4500 victor intake the bad: the heads need