1990 Buick Estate Blower Motor question
Hello Group, I have a 1990 Buick Estate that the blower motor does not work. Its a 42K mile car. I had it in storage a few years and I figured I would get it on the road and enjoy her for a bit before I sell it. Anyway, I dont have the shop manual and I

gen V blower seized up
I was getting on it today and the motor cut out. I was full throttle ding about 110mph when it happen. today is the first cool (75*) day of the season so im thinking i was seeing too much boost and ran lean. Its all speculation at this point. all i know

Ported blower? Gen V?
i've seen others make a reference to it, can anyone explain it?

Write-Up: Blower Motor Control Module Replacement
As far as repairs are concerned, it doesn't get any easier than this. Tools Needed - 7mm socket or wrench - 5.5mm socket or wrench - Possibly a Phillips screwdriver The BMCM is located on the passenger side floor in the heater box. You will

Write-Up: How to Polish a Supercharger with pics
ok so if u have made the desicion that u want to polish your supercharger. this how to is for you. this might also work for a rebuild as well, im rebuilding this M62. please be aware i will not be held responsible for any damage you do to your car, DO AT

FAQ: m90 blower in place of m62?
Ok peoples i bought a rebuild kit for a bore with the bigger heads with the injectors in them just like the serries two's . As far as everyone has led me to belive in a couple of months im goin to strip down the engine. Bore it and rebuild it with new

Porting & Polishing Gen III Blower
I want to port & polish a Gen III supercharger. I also have a stock LIM and TB that could use some help. Has anyone ever done this, or know of someone that could be of assistance? I'm not looking to experiment. I want to get it right the first

FAQ: Selecting Proper Supercharger Pulley & Belt Size (Series I)
Question: If I go w/ a smaller pulley and I have no way of scanning...how do I know how much KR I have? Could I end up with the car running slower because of increased KR with the new pulley or will I see definate gains from the new pulley? Please

My 74 Buick Century
This is my 74 Buick Century Luxus. 21000 miles, almost mint condition. I literally found it in a barn almost a year ago in it's present condition. Has the buick 350 - hard to find aftermarket parts for. Winter plans include air ride and a few

Blower Motor is Sick - Little Help??
The 100,000-mile curse has started...that was fast. Driving to the lake this afternoon it felt like the a/c was not blowing that hard. It was cold, just not much force. Sitting at a light I could actually feel and hear the blower motor slow down an

Roots blower intercoolers
Has anyone run a "Super chiller" intercooler on a street/track car? I've seen it done in magazines with a water tank in the trunk or bed or a remote radiator, anybody on the forum tried this out? Manufacturer claims 100 hp gain . Raises blower u

6-71 blower kit sale or trade NEW PICTURES
I have the blower kit from cvarnes. has the large rotor 6-71 and blue thunder intake up for sale with pulleys and autometer boost guage and lines . and carb plate for two 4150's .I lost my job and am forced to change directions on the car and set some

8:71 blower top-get it or not?
I have a buddy that has the impeller portion of an 8-71 supercharger and I was wondering if I should get it from him for either my 400 or maybe 460. The 400 currently has an 8:1cr with a stock rebuild whereas the 460 is just a pile of parts waiting for a

03/04 Cpbra Guys want a 6-71 Blower?
Just came across this on eBay looking for a cheap 2.8

Blue thunder CJ blower intake manifold
I want one unmolested , please pm me