Dyers 6-71 on a 460
Looking at a boat in the near future that has a 460 with a Dyers 6-71 blower and what appear to be a pair of 600cfm 4150 carbs on it. Going to hear it run, what should I be looking for to gauge blower and motor health? These should be otherwise stock

Roots vs centrufical blower
Throwing an idea out here.... How would a littlefield 10-71 to a 14-71 blower be vs a f2 procharger as far as a 521 to a 528 cu in engine setup? The motor would be a wedge style headed deal at 8:5 - 9:1 compression range. Changing boost levels will be a

Kaase Boss Nine Blower .....
found this pic on Jon Kaase site .its one sweet Boss Nine Blower setup ..it looks bad azz guys

2000hp engine build
I have nothing else to talk about on my build so let us look down the road and do a little day dreaming. You have to stay with a 10.3 deck block and race gas. I have always liked the old school root style blowers being that you don't have to get into

Engine bay paint
So since I've got a week to kill 'til my new job starts, and I'm trying not to spend a whole lot of $$$ until that happens, I decided to do a little paint work under the hood. I might do the engine cover over because I'm not terribly

Blower Motor is Sick - Little Help??
The 100,000-mile curse has started...that was fast. Driving to the lake this afternoon it felt like the a/c was not blowing that hard. It was cold, just not much force. Sitting at a light I could actually feel and hear the blower motor slow down an

Blew the engine with only 500 miles on the S/C, what's next?
So since my engine is toast now, I've got to build it. I'm looking for the high 500's or the low 600's with a T-trim and 15lbs of boost. Here's the list so far.... Fox Lake Stage 2 heads. Fox Lake Stage 2 P.I. heads flow a whopping 223 cfm intake

Roots blower intercoolers
Has anyone run a "Super chiller" intercooler on a street/track car? I've seen it done in magazines with a water tank in the trunk or bed or a remote radiator, anybody on the forum tried this out? Manufacturer claims 100 hp gain . Raises blower u

6-71 blower kit sale or trade NEW PICTURES
I have the blower kit from cvarnes. has the large rotor 6-71 and blue thunder intake up for sale with pulleys and autometer boost guage and lines . and carb plate for two 4150's .I lost my job and am forced to change directions on the car and set some

8:71 blower top-get it or not?
I have a buddy that has the impeller portion of an 8-71 supercharger and I was wondering if I should get it from him for either my 400 or maybe 460. The 400 currently has an 8:1cr with a stock rebuild whereas the 460 is just a pile of parts waiting for a

03/04 Cpbra Guys want a 6-71 Blower?
Just came across this on eBay looking for a cheap 2.8

Blue thunder CJ blower intake manifold
I want one unmolested , please pm me

14-71 Littlefield Hi helix Blower Alum Case
Set up for ALky, newly stripped, Just came back from ODDY's Aluminum case, Hi Helix front discharge.... not for street use. Oddys sets up alot of blowers for pulling trucks, this one is ready to roll. has a new 5 inch snout to set it back!

Adding additional blower outlet to Nuevo
I'm interested in adding an additional hot air blower outlet to the end of the bed so it blows hot air into the cab as this is a very big unheated area in the Nuevo.. My question is regarding the ducting pipe and connection.. most people would no doub

Thank god for Patrick Cryne
Tonight in this programme about dodgy football ownership/takeovers a certain 'Barnsley Town' were mentioned and we were told we were owned by Mark Openshaw Blower. At first I was worried - as in WHO THE FCK IS THAT!?!?! AND WHERE HAS CRYNE GONE?!?!?! Bu