Post up how many miles you got out of your bearings. Also list what size tires you were running most of the time. Want to see if we see some sort of pattern here.
My 65 chevy is making alot of noise in the front right corner. It sounds like I'm driving on directional tires. It finally dawned on me, "wheel bearings". Now I have the hub off, do I have to remove the seal to get the inside bearing out? Do I
Thought I'd change out the front wheel bearings, since I think I've got a slight thump from that area. But how to remove? The manual says you need a special tool, and when I take a close look there is a spacer between the bearings that doesn't allow a
What type are you using and how many miles are you getting out of them? I got 1400 on the stock bearings but less than 200 on a set of all balls and now have 100 on a set of moose that have play in them..
How hard is it to change them? i really need to get them done asap and dont have a clue how to do em! , i wanna have em done before sunday if possible, if you know anyone that can do em that would be great the money is waiting ! Help a dubber out
I purchased a set of front wheel bearings and seals on Ebay.
The outer bearings are too small, probably for a 924 or early 944.
FAG 394 54035 365 or 211 405 645 D or 051 3848 or KLM 11949.LM11910
All these numbers are on the box, quantity 2,
Ok, first and foremost a disclaimer. Nothing you read on this site can be held responsible for damage to your car, cat, dog, property etc. If, in the event of working on your car, while following the instructions contained within, you happen to seriously
From PinkBike:
Mavic has been in the wheel game for a while now. Everything from XC, to Enduro, to DH wheels have been manufactured in Mavic's factory, and they all seem to include some pretty cool technologies. Recently we picked up a pair of the Mavi
Check her rear! - Rear suspension linkage check
This article is a guide to help you check your rear suspension linkage bushes, which can fail a MINISTRY OF TRANSPORT check / MOT.
Once worn to excess, can also seriously upset your handling which
You will need:
Floor jack
2 Jack stands
15mm socket
**21mm socket**
36mm socket
½ inch drive ratchet
The biggest breaker bar you can get your hands on.
Sharp flat blade screwdriver.
Hammer
Rubber Mallet
Grease
A coat hanger or wire tie.
3
1181 wrote:Thanks Justin,
Installed Bridgestone GR80 (185/70R14) in your shop yesterday. Great Quality, Great Price, Great Service.
It is hard to get GR80 recently, thanks for the effort in getting them.
Post your progress or regress.
Here post pictures of you newest decks/setups!
